Bespoke hand-built frames since 1981.Read More...
Bespoke hand-built frames since 1981.Read More...
Made-to-measure, Hand-made, Made for you – aluminium or carbon fibre frames.Read More...
With 58 years of combined experience in the bicycle industry, it could be said that Peter Bird and Robert Wade 'know a bit about bikes and cyclists'.Read More...
There's a lot of information to help you order, but we expect you will have some questions, so drop us an email or give us a call.Read More...
Spend a bit more time with the bike that you are considering buying, while exploring the beautiful countryside around the Ironbridge gorge.Read More...
If you have ever made something, even the most simple of items, you probably know the great pleasure and pride that you had in using it or giving it to someone. Reading this probably means that you like bikes and cycling, so how would you feel riding a bike on a frame that you made to a size and shape to fit you perfectly?
Maybe you haven't made anything with your hands before. Don't let that stop you from learning and trying. You probably have the ability, but haven't had the opportunity. We have the patience, skills and abilities to enable you to build a bicycle frame. You just need a positive can-do approach, an open mind and basic hand-eye co-ordination.
Peter Bird was the first frame-builder in the UK to introduce a frame building course back in 1993. The courses today are taught by either Peter Bird or Robert Wade, both very experienced frame builders who produce Swallow bespoke frames and design the Landescape range of aluminium and carbon fibre frames.
We don't like to restrict what you can do, though there may be some frame styles and techniques that would be outside the scope of a week-long course. We will send you an initial assessment questionnaire to see what type of frames and techniques would be suitable for you. We prefer that the frame is complete and ready for painting by the end of the course.
The week-long course starts on Monday morning. First, we size you on our sizing jig and explain the basics of size and frame geometry. This is then translated onto the frame jig and you can then start cutting and mitring tubes. Before taking brazing torch to your frame you will work on a small test piece. You will then work through each step of construction and we'll make sure that you gain the understanding of the work you have done. By Friday afternoon you will have built your very own frame.
Prior to the course we will discuss with you the type and style of frame that you plan to build and the type of equipment you will be fitting to the frame. We can also help you design your paint scheme. After the course, when the frame has been painted, you can return to do a wheel-building and/or an assembly course to complete the build of your bike.
Bike Radar followed one of our courses - the write-up and images showing almost step-by-step the processes invloved can be seen here.
Some of our clients have written blogs during their courses and these can be seen here:
Other examples of bikes and frames from our courses can be seen on the Bicycles by Design Facebook Page.
Please contact us to discuss suitable dates and availability - we are quite flexible as tuition is 1:1 and there are two of us that teach. Let us know which dates work for you and we'll see if we can fit you in that week. We will hold an initial date for you for 7 days to allow you to make any arrangements. A firm date is only secured with a deposit of £300.
For more information drop us an email of give us a call. Below are some frequently asked questions that may help you.
When is the next available course? Usually we are booked up approximately 8 months ahead, so as a guide count 8 months from today and that will be the first available week.
How much does it cost? For a 5-day course, Monday to Friday, £975 plus materials.
What materials do I need to build a frame? A tube-set, lugs, bottom bracket, frame ends, forks, fork crown and steerer (if required), braze-ons and bosses for the type of frame you are building, flux, brazing rod, silver solder, gas and air. We will discuss your exact requirements and then order or supply these for you. To ensure compatibility of all frame parts we encourage you not to buy these from other suppliers.
And how much do the materials cost? That depends on the tubing and style, but from approximately £105 for a Reynolds 525 or approximately £240 for a Reynolds 853 race frame. Forks blades range from £60 to £80. Frame parts again do vary from around £50 to over £100 depending on types of lugs, crowns and BB shells.
Can I use some of those curly lugs with fork crown and bottom bracket shell to match? Nice as they are, they do require very accurate and clean brazing, something that is not easy to do on your first frame. Simple plain lugs, fork crown and BB shell are the order of the day, and there are quite a few variations.
Is it possible to have stainless lugs and polish them? Stainless parts require silver soldering, so are outside of the scope of your first frame. Filing and cleaning up lugs plus polishing lugs adds about another 2-3 hours work per lug, and they have to soldered very cleanly. So again outside the scope of a first frame and a weeks course.
Can I build in Reynolds 953, 931 or Columbus XCr? These require very advanced techniques and skills. Only if you can convince us that you have the appropriate skills and experience, would we consider this request.
Can I build a lug-less frame? This requires very advanced techniques and skills and is quite time-consuming. Only if you can convince us that you have the appropriate skills and experience, would we consider this request.
Can I build a frame with an Eccentric Bottom Bracket for use with hub gears? Unfortunately, there is currently no lugged BBs available to facilitate this. For hub gears you can use sliding rear frame ends.
What about lug-less 953? Shall we learn to walk before we can run? This is outside the scope of a week's course, see points above.
Can I build a tandem frame? This is definitely a two week build-time due to being lug-less, the sheer number of joints and is not for the faint-hearted. It requires very advanced techniques and skills and is time-consuming. Only if you can convince us that you have appropriate skills and experience, would we consider this request.
Does the course give me a qualification? As yet there is no UK qualification in bicycle frame building. You will have been taught the basic skills by an experienced frame-builder, but you will require a lot more skills and experience before you could consider becoming a frame builder by yourself.
Could I set myself up as a frame builder after the course? Ask this question after you have done the course.
So what do I get at the end of the course? A rideable frame that will require painting, photos of you building it, some great memories and a notebook full of notes and techniques describing how to build a frame. We provide the initial outline of the techniques and the course structure to you once you have paid your deposit.
Do you provide accommodation for the course? We give you lots for recommendations of good local B&Bs, hotels or campsites that you can book yourself but we don't do the booking for you.